(1) There is the possibility of dropping pieces at the pre-cutting station of the auxiliary material belt. The main factors affecting the falling pieces are: pre-cutting amount, pre-cutting die, and t...
There are two ways to choose the standard mold: one is the standard usage, that is, the structure of the standard is completely adopted, and the size range of the components is selected; The second is...
Friends who have mold materials ask us, under what circumstances do you use a fine nozzle mold stand in the mold? In this regard, Huarui Xun mold has sorted out the applicable conditions of the fine w...
1, the large nozzle is the mold that the front mold is not separated separately, also known as the second plate mold guide column formal assembly, and the fine nozzle is the fixed mold has a separate ...
The fine nozzle mold stand and the simplified fine nozzle mold stand belong to the three plate mold stand (double parting surface) in the plastic injection mold stand. What are the differences between...
Large water mouth mold (also known as single parting surface mold), the standard length and width size from 150mm x 150mm(referred to as 1515 series) to 600mm x 800mm(referred to as 6080 series); Beca...
Consult 
