鹰潭What is the difference between a fine nozzle mold and a simplified fine nozzle mold?

The fine nozzle mold stand and the simplified fine nozzle mold stand belong to the three plate mold stand (double parting surface) in the plastic injection mold stand. What are the differences between the two? No hurry, Huarui Xun mold for you to sort out the relevant information, quickly follow Xiaobian together to see.

Appearance distinction

1. There are four guide pillars for the fine water mouth mold holder.

2. Limited position gaskets on the four pull rods of the fine water die stand.

3. Thin water mouth mold frame can realize the structure of push plate mold.

Cost differentiation

Because there are more than four guide edges of the nozzle die frame, the difficulty of processing is increased, so the price is generally 1.3 to 1.5 times that of the simplified nozzle.

The standard length and width specifications are from 200mm x 250mm (referred to as 2025 series) to 500mm x 700mm (referred to as 5070 series).

The runner and gate are not on the same parting line. The product is demoulded online in the parting mold, and the water mouth material is demoulded online in the parting mold of the water mouth plate.

Simplified nozzle (also known as double/multi-parting surface die stand), is a simplified version of the nozzle die stand, the standard length and width specifications from 150mm x 150mm (referred to as 1515 series) to 500mm x 700m(referred to as 5070 series).

Simplified mold (also known as three-plate mold), the function is similar to that of the mold frame, and the runner and gate are not on the same parting mold line; The product is demoulded online in the parting mold, and the water mouth material is demoulded online in the parting mold of the water mouth plate.