Mold mold frame production process detailed description

The application of the mold is the basis of the production of many commodities, the necessary tool for the mold, and the mold mold frame is the skeleton diagram of the abrasive tool, which has a very key role in the production. Now after many years of progress, the mold mold frame production and processing manufacturing industry is also equivalent to the maturity period than before, in addition to can be customized according to demand, you can also choose according to the normative production process to make out the mold mold frame goods. Below to understand the next technical professional mold mold frame production and processing of what processing technology.

1. Open the material

When cutting the mold frame, it should be strictly stopped according to the nominal size requested by the drawing and the processing allowance saw or gas cut out the bad material. When opening materials, we should pay attention to the use of tape or steel tape to measure the required length, width and thickness, but also to check whether the mold mold frame processing allowance is enough, and measure the difference between the two diagonal lengths, and determine whether the Angle of the plate can be fundamentally correct.

2, rough milling

Rough milling process includes rough milling plane and rough milling four sides, through rough milling plane process can be the mold mold frame processing to leave a grinding margin, and at the same time milling plate thickness on both sides of the uneven expenditure and the surface of the black skin. The use of rough milling four-sided process can set aside the processing margin required for fine milling of the mold mold frame, and mill the uneven and saw cut marks on the long and wide four sides of the board, and fundamentally ensure the perpendicularity of the four corners of the board.

3. Open a thick frame

When the mold frame is processed to open the rough frame process, the processing allowance required for finishing can be set aside, and the concave or convex cavity, groove and forming surface of the plate can be milled out.

4, rough grinding surface

The rough grinding plane process can leave the required margin for the fine grinding of the mold frame, and the upper and lower sides of the plate can be ground flat, so that the parallelism can reach the request and have a certain brightness.

In addition to the above mold mold frame processing technology, the quality of stable mold mold frame also through boring processing, drilling machine processing, fine milling four sides, chamfering, fine frame processing and fine grinding and other multi-process to be finally completed. It can be seen that the mold mold processing is very precise, and because of such precision, it can have extremely high processing quality to ensure that the consumption requirements of the mold can be met.