The model of the standard mold holder is introduced

The mold frame is the support of the mold, for example, the die casting machine will combine and fix each part of the mold according to a certain law and position, and make the mold can be installed on the die casting machine part is called the mold frame, which is composed of the push mechanism, the guiding mechanism, the prereset mechanism die foot pad block, and the seat plate.

Die stand, simplified nozzle system die stand, nozzle die stand. The combination of various types of system molds is not the same, and it is divided into many fancy styles, expressed by some special English letters:

I: indicates that there are working faces and working bottoms

H: stands for straight mold: indicates that there is no panel in the large orifice mold, while the fine orifice and simplified mold have a panel.

T: indicates a straight die + panel in a large nozzle die holder

General standard mold frame according to size model points:

Big water mouth 1515-5070

Simplified 1515-5070

Water inlet 2025-5070

Mold model: Each combination form represents a model.

Series: In the same model, the series is divided according to the perimeter size (length * width) of the fixed and moving templates.

Specifications: In the same series, specifications are divided according to the thickness of fixed and moving templates and pads.

The presentation of the application effect of the mold frame needs to meet the corresponding performance requirements, such as good strength, good impact resistance, and so on. The die frame has a preforming device, a positioning device and an ejecting device. It is generally configured as A panel, A board (front template), B board (back template), C board (square iron), bottom plate, thimble panel, thimble bottom plate, and spare parts such as guide posts and return pins.