鹰潭What is standard and what is non-standard

The so-called standard mold frame is generally composed of the setting seat of the upper mold, the setting seat of the lower mold, the moving seat, the moving seat, the gasket, the moving seat, the pushing rod fixing seat, the pushing plate, the guide post, the guide sleeve, the reset rod, etc. In addition, there are some special structure of the mold, such as point gate mold, mold with push plate and so on. Other parts of the mold frame can be supplemented as needed, such as correct positioning devices, support columns and other components. Basically the parts used are already on the standard die rack. This mold can be processed directly. There is no need to go through all sorts of trouble.

Non-standard mold stands are generally ordered by mold makers themselves in mold factories, buy various mold parts by themselves, and drill and install themselves. Non-standard molds made by oneself are cheap and suitable for their own injection products. It's easy to fix a problem with the rear side frame itself. However, this mold looks much worse than the standard mold. Because the standard die holder regrinds around the template, the template looks bright. Not the goal, but not the process.

The mold frame is the appearance of the mold, and a good mold frame has a direct impact on customers. In addition, the accuracy of the mold also directly determines the accuracy and quality of the mold, the basic technical conditions of the general customer in the mold production include the flatness of the plate and the verticality of the side, the tension of the guide column and the mold, the verticality around the mold, the parallelism of the plate, the opening and closing degrees of freedom between the relative motion plate of the mold embryo manufacturing, surface roughness, chamfer and other mold appearance